Nickel Chromium Plating
From the most critical pre-treatment in the electroplating process, the substrate is completely decontaminated, degreased and cleaned through multiple processes, and then plated with triple nickel to increase the corrosion resistance of the product. It can do the best surface treatment for products with special shapes, especially for blind The clean inside and bottom of the hole parts make the product more impression.
characteristic
- It is beautiful and has antirust and corrosion resistance effects. It is often used in automobile parts, aluminum alloy parts, food machinery, automobile wheels, nuts, bolts, hand tools, Socket, Spanner, etc.
Electroless Nickel Plating (Electroless Nickel)
Uniform film thickness, high precision, suitable for components with high complexity, such as: computer components / heat sinks, printer/fax machine shafts, mechanical parts, molds, electronic parts, aviation precision parts, and those requiring uniform thickness product.
characteristic
- The hardness of chemical nickel (electroless nickel) is generally 400 ~ 500HV. After heating at 400 ℃ for 1 hour, the maximum hardness can reach 1000HV.
- The uniformity is good, no matter how complex the shape of the workpiece, the thickness of the coating of each part is the same.
Leadless and Cadmiumless Electroless Nickel environmentally
This coating conforms to the content of harmful substances stipulated in the ROHS EU Convention. This coating has the same characteristics as general electroless nickel, but the color is less shiny.
characteristic
- The hardness of chemical nickel (electroless nickel) is generally 400 ~ 500HV. After heating at 400 ℃ for 1 hour, the maximum hardness can reach 1000HV.
- The uniformity is good, no matter how complex the shape of the workpiece, the thickness of the coating of each part is the same.
Hard Chromium Plating
High wear resistance and impact resistance, widely used in: auto parts, mechanical parts, mechanical equipment, molds, valves, cylinders, shafts, ball for ball valve and products that require high hardness and high wear resistance
Hard chromium electroplating products often do local strengthening electroplating because of the use requirements, especially in the plating shelters and holes, they must have considerable professional technology and experience to overcome.
characteristic
- The hardness of the coating can reach 900 ~ 1000HV, with high wear resistance and low friction coefficient.
- After chromium plating of mechanical parts, it can improve wear resistance and extend service life.
- Can be used for local electroplating, depending on where the product is functionally plated.
- Can be used for product size repair.
Nanometer Coating (Nanometer Spray)
It is processed by clean room automatic spraying equipment, and the special nano-film and process of nano-coating, so that the accessories can also be colored with the product design, the color can be according to customer needs; unlike traditional electroplating materials that require conductive materials, spray coating is available Used in plastics and other non-conductive products.
Applicable to: car nuts, car wheels, car spare parts, bicycle bodies, cell phone shells, 3C electronic products.
characteristic
- It is different from the single color of the bright surface of the general surface treatment.
- Compared with the traditional Electrophoretic Deposition(ED), the product is resistant to impact and does not fade after being nano-sprayed.
- Automated process and strict control, uniform color and no porosity.
- The film is even without dead angles.
- The color can be customized, not limited by the color.
